Product Overview
Technical Summary
| Product type | IPC477E |
|---|---|
| Display | 15 in TFT widescreen display, LED backlighting; projective-capacitive touch |
| Resolution | 1 366 × 768 pixel |
| Supply voltage | 24 V DC |
| Processor options | Celeron G3902; Core i3-6102E; Core i5-6442EQ; Xeon E3-1505L v5 |
| Main memory | 16 GB in the collected configuration; DDR4-2400 SO-DIMM, 4 / 8 / 16 GB, 16 Gbyte maximum |
| Storage | 240 GB solid-state drive SATA in the collected configuration |
| Industrial Ethernet | 3x Ethernet (RJ45); 100 Mbps and 1000 Mbps |
| Serial interfaces | 2x RS 232/RS 485, selectable in the BIOS |
| Graphics interface | 2x DisplayPort |
| Mounting | For mounting on stand or supporting bracket; stand mounting prepared for pedestal and extension components |
| Protection | IP65 at the front and rear |
Key Features
TFT widescreen display with LED backlighting, 1 366 × 768 pixel resolution, and projective-capacitive touch operation.
3x Ethernet (RJ45) interfaces support 100 Mbps and 1000 Mbps; bus diagnostics are available.
DDR4-2400 SO-DIMM memory is available as 4 / 8 / 16 GB, with 16 Gbyte maximum capacity; the collected configuration has 16 GB and a 240 GB SATA solid-state drive.
Type of supply voltage: 24 V DC. Mains/voltage failure stored energy time: 20 ms.
For mounting on stand or supporting bracket; stand mounting is prepared for pedestal and extension components. IP65 protection applies at the front and rear.
The collected configuration is without USB at the front, without PCIe, without replaceable mass storage, and without SIMATIC software; it has 2x RS 232/RS 485 and 2x DisplayPort.
Frequently Asked Questions
What exact product is this line item?
It is Siemens 6AV7251-7CC34-0FA0, a SIMATIC IPC477E Panel PC with a 15 in TFT widescreen display and projective-capacitive touch.
What is included in the collected configuration?
The collected configuration has 16 GB memory, a 240 GB SATA solid-state drive, 3x Ethernet, 2x RS 232/RS 485, 2x DisplayPort, and a 24 V DC industrial power supply.
Which interfaces and mounting details should be retained in the BOM?
Retain 3x Ethernet (RJ45), 2x RS 232/RS 485 selectable in the BIOS, 2x DisplayPort, and mounting on a stand or supporting bracket. Support arm mounting is No.
What is excluded from the configuration?
It is without USB at the front, without PCIe, without replaceable mass storage, and without SIMATIC software.
What should I provide for a project quotation?
Provide the requested quantity, destination, schedule context, and any additional BOM lines together with this exact line item.
