Product Overview
Technical Summary
| Analog output capacity | 4 |
|---|---|
| Rated load voltage L+ | 24 V DC |
| Output ranges | 0 to 10 V; 1 V to 5 V; -10 V to +10 V; 0 to 20 mA; -20 mA to +20 mA; 4 mA to 20 mA |
| Resolution | 11/12 bits |
| Front connector | 20-pin |
| Voltage output load impedance, min. | 1 kΩ |
| Current output load impedance, max. | 500 Ω |
| Conversion time per channel | 0.8 ms |
| Diagnostics | Parameterizable diagnostics, substitute values and diagnostic alarms |
| Potential separation | Between channels and the backplane bus, load voltage L+ and electronics power supply; none between channels |
| Lifecycle | Product cancellation |
Key Features
4 analog outputs with voltage ranges of 0 to 10 V, 1 V to 5 V and -10 V to +10 V, plus current ranges of 0 to 20 mA, -20 mA to +20 mA and 4 mA to 20 mA.
Load voltage L+ is rated at 24 V DC with reverse polarity protection. Voltage output has short-circuit protection and a maximum short-circuit current of 25 mA.
Diagnostics function, substitute values, diagnostic alarms and diagnostic information are parameterizable or readable as specified; the Group error SF LED is red.
The analog outputs are isolated from the backplane bus, load voltage L+ and electronics power supply, but not between channels. Isolation is tested with 500 V DC.
The required front connector is 20-pin. Removing and inserting with the active backplane bus is possible; actuator wiring supports four-wire voltage output and two-wire current output.
Product cancellation. Dimensions are 40 mm wide, 125 mm high and 117 mm deep; weight is approximately 220 g.
Frequently Asked Questions
What exact product is this analog output module?
It is Siemens 6ES7332-5HD01-0AB0, a SIMATIC S7-300 analog output SM 332 with 4 isolated AO.
Which voltage and current output ranges are supported?
Voltage ranges are 0 to 10 V, 1 V to 5 V and -10 V to +10 V. Current ranges are 0 to 20 mA, -20 mA to +20 mA and 4 mA to 20 mA.
What connector and actuator wiring does the configuration use?
It requires a 20-pin front connector, with four-wire connection for voltage output and two-wire connection for current output.
What should be included with a project quotation request?
Include the requested quantity, destination, schedule context and any additional BOM lines together with this exact line item.
