Product Overview
Applications
For 24 V DC safe shutdown of DQ and F-DQ.
For safe digital inputs and a safe digital output in an ET 200SP configuration.
Technical Summary
| Product type designation | F-PM-E 24 V DC/8 A PPM ST |
|---|---|
| Product function | 24 V DC safe shutdown of DQ and F-DQ up to PL D/SIL2 or PL E/SIL3 |
| Supply voltage | 24 V DC rated; permissible range 20.4 V to 28.8 V |
| Digital inputs | 2; DC, rated 24 V |
| Digital output | 1; parameterizable |
| Output current | 8 A rated; 8 A maximum per channel and per module; observe derating data in the manual |
| Encoder supply outputs | 2; total current maximum 600 mA |
| BaseUnit | BU type C0 |
| TIA Portal | Configurable/integrated from V12 |
| PROFINET | From GSD version/GSD revision V2.31 |
| Protection | Reverse polarity, short-circuit, open-circuit, and overload protection |
| Product lifecycle | Active Product |
Key Features
Provides 24 V DC safe shutdown of DQ and F-DQ up to PL D/SIL2 or PL E/SIL3.
Has 2 digital inputs and 1 parameterizable digital output.
Output current is rated at 8 A; total current per channel and per module is maximum 8 A, with derating data to be observed in the manual.
Rated supply voltage is 24 V DC, with a permissible range of 20.4 V to 28.8 V and reverse polarity protection.
STEP 7 TIA Portal is configurable/integrated from V12; PROFINET is supported from GSD version/GSD revision V2.31.
Supports automatic encoding, I&M0 to I&M3 data, diagnostic alarms, and RUN, ERROR, PWR, channel-status, channel-diagnostic, and module-diagnostic LEDs.
Frequently Asked Questions
What exact module is Siemens 6ES7136-6PA00-0BC0?
It is a SIMATIC DP F-PM-E F-PM-E 24 V DC/8 A PPM ST fail-safe module for ET 200SP.
What supply voltage does this module use?
The rated supply voltage is 24 V DC, with a permissible range of 20.4 V to 28.8 V.
What I/O does the module provide?
It has 2 digital inputs and 1 parameterizable digital output. The output current is rated at 8 A.
Does the module provide substitute values or hardware interrupts?
It has no connectable substitute values and no hardware interrupt.
What configuration details should be included for a quotation request?
Include the requested quantity, destination, schedule, and any additional BOM lines.
