Product Overview
Technical Summary
| Product type designation | CM 4x IO-Link |
|---|---|
| Hardware functional status | FS08 |
| Firmware version | V1.2.x |
| IO-Link ports | 4 |
| IO-Link transmission rate | 4.8 kBaud (COM1); 38.4 kBaud (COM2), 230 kBaud (COM3) |
| Load voltage | 24 V; permissible range 20.4 V to 28.8 V DC, for 1L+ and 2L+ |
| Connection of IO-Link devices | Port type A via 3-core cable; Port type B with additional device supply: 1.6 A total current of all ports |
| IP degree of protection | IP65/67 |
Key Features
4 IO-Link ports are simultaneously controllable and support IO-Link protocol 1.0 and 1.1.
IO-Link, DI, and DQ operating modes are supported; DQ output current is max. 100 mA.
Load voltages 1L+ and 2L+ each have a rated value of 24 V and a permissible range of 20.4 V to 28.8 V.
IO-Link devices can use Port type A via 3-core cable or Port type B with additional device supply of 1.6 A total current of all ports.
The module has IP65/67 protection, supply-voltage monitoring, wire-break and short-circuit diagnoses, and green or green/red LED indications.
Configuration is possible without S7-PCT using the autostart/manual function; master backup is possible with function block IO_LINK_MASTER.
Frequently Asked Questions
What is the exact Siemens line item?
It is Siemens 6ES7147-5JD00-0BA0, SIMATIC ET 200AL CM 4x IO-Link.
How many IO-Link ports does the module have?
It has 4 IO-Link ports, all simultaneously controllable.
What load voltage does the module use?
Load voltages 1L+ and 2L+ each have a rated value of 24 V and a permissible range of 20.4 V to 28.8 V DC.
What connection options are supported for IO-Link devices?
Port type A is supported via 3-core cable. Port type B is supported with additional device supply of 1.6 A total current of all ports.
